ENECOM HF185
Built with high-performance aerospace solar cells. Latest generation ultrathin and ultraflexible panels (1.7 mm). 17.25% mono-crystalline cell efficiency. The panel is a sandwich construction made up of a plastic support + solar cell + UV-resistant epoxy resin surface coating. Installation by means of double-sided tape. Connection cable with plug, included.
Version A: mono-crystalline panels.
Version B: fitted with Sun Power top-efficiency cells. This results in more compact dimensions and 23% higher efficiency over standard cells.
Διαθέσιμο κατόπιν παραγγελίας
Tolleranza (%) up to 5% only positive
Tensione a circuito aperto, Voc (V) 23,6
Corrente di corto circuito, Isc (A) 9,7
Tensione a Pmax, Vmp (V) 20,2
Corrente a Pmax, Imp (A) 9,2
Coefficiente di temp. di lsc, α (%/°C) 0,06
Coefficiente di temp. di Voc, β (%/°C) -0,36
Coefficiente di temp. Pmax (%/°C) -0,36
Fattore di riempimento (FF)(%) 81,0
Temperatura di funzionamento (°C) da -40 a +80
NOCT (°C) 47,5
Materiale del modulo UVA resistant Plastic Polymer
Dimensioni (b x h) (m) 0,671 x 1,537
Spessore (mm) 1,7
Peso (kg) 2,6
Tensione massima di sistema (V) 600
Celle fotovoltaiche n. 36 m-Si 158,75×158,75 mm 5BB intere
Terminali di uscita 1m Cables with MC4 connectors
Diodo di bypass (A) 2 inside JB, 12A
| Βάρος | 2 κ. |
|---|---|
| Διαστάσεις | 1350 × 660 × 2 cm |